You are here: Home > News >

The Special Announcements for Mini Concrete Mixer

     All systems and components of the new mini concrete mixer must be tested and have the test run in accordance with the requirements of the operation instruction before the new mini concrete mixer is put into use. You should check the rotation direction of the mixing drum or mixing vane. And confirm the operation and brake of each working device is normal before operation.


Mini Concrete Mixer


     Stationary concrete mixer should be installed in the firm pedestal. And for the mobile concrete mixer, it should be installed on the smooth hard floor, and supported by the wood or strut. You should make sure the horizontal tires don’ have any forces. If you will use the mobile concrete mixer for more than three months, then you should remove the tires and properly keep them.

     In the operational process of mini concrete mixer, do not make the sand fall into the moving parts, in case the moving parts get stuck and are damaged. When the feeding funnel has been ascended, nobody is allowed to get through or stay under the bucket, so as to avoid accidents caused by brake failure. If you must do the maintenance or cleaning work under the bucket, you should stop the machine and use the safety chain to pull the feeding funnel.

Any question or support, please fill in the form below,we will get back to you as soon as possible!!


Related Articles:
Concrete Mixer Sold to Germany! Features Introduction of Twin Shaft Concrete Mixer Daswell Portable Concrete Mixer Can Meet Market Demands Innovative Concrete Mixer Technology to Meet Market Demand Sicoma Twin Shaft Concrete Mixer to Southeast Asia How to Replace the Mixing Blade for Concrete Mixer How to Reduce the Maintenance Cost of Concrete Mixing Machine Mixing Quality of Mini Concrete Mixer Equipment Details of Portable Concrete Mixer Product Knowledge of Reversing Drum Concrete Mixer

Copy Right:Henan Daswell Machinery Co., Ltd. All rights reserved.