News

You are here: Home > News >

What is the safety operation specification of concrete mixer

1. After the operation, you should timely clear the stocked materials in the machine, water tank and the pipe, clean and maintain the machinery, clean the work place, cut off the power supply and lock the switch box.

2. Make sure that the instrument and index signal are accurate and reliable, and a rubber sheet or dry plank should be fitted on the control board of the concrete mixer.

3. The transmission mechanism, working device and brake shall be tight and reliable, so that they could guarantee the normal work.

 

concrete mixer

 

4. The aggregate size should be consistent with the performance of concrete mixer, the aggregate, which is beyond the permission scope, shall not be used.

5. Run idle, check the rotation direction of the mixing drum or mixing blade, and before operation, make sure the operation of each working device is normal.

6. It is strictly prohibited to put your head or hand between the hopper and rack, and when the concrete mixer is in operation, you are not allowed to use your hands or tools to dig into the mixing drum.

7. In operation, if the concrete mixer goes wrong and cannot continue to operate, you should immediately cut off the power and remove the concrete in mixing drum.

Any question or support, please fill in the form below,we will get back to you as soon as possible!!

*
*

Related Articles:
Concrete Mixer Sold to Germany! Features Introduction of Twin Shaft Concrete Mixer Daswell Portable Concrete Mixer Can Meet Market Demands Innovative Concrete Mixer Technology to Meet Market Demand Sicoma Twin Shaft Concrete Mixer to Southeast Asia How to Replace the Mixing Blade for Concrete Mixer How to Reduce the Maintenance Cost of Concrete Mixing Machine Mixing Quality of Mini Concrete Mixer Equipment Details of Portable Concrete Mixer Product Knowledge of Reversing Drum Concrete Mixer

Copy Right:Henan Daswell Machinery Co., Ltd. All rights reserved.