News

You are here: Home > News >

Some Notes to Clean Concrete Mixer

 

The ready-mixed concrete is an important material in the constructions, and it is widely used in road, bridge and buildings, so the concrete machinery is rapidly developing. However, the operator should regularly clean these large machinery, and check the equipment to make sure they can work normally. Therefore, Daswell will introduce some notes to clean concrete mixer to users.

1. Regularly maintain the equipment according to the service regulation, and make sure it is clean to prevent it from being corrosive and rusty; check the lubricated parts of the equipment and add the lubricant regularly.

concrete mixer

2. Check every controller before starting the concrete mixer; flush the mixing drum with water and sand in about 10-15minutes after it stops working, and then discharge the water and sand. If the operator needs to enter into the mixing drum, he should cut off power supply, demount the fuse protector and clock the switch box.

3. You must not clean the residual concrete by knocking the mixing drum with a hummer, and you may use a chisel.

4. In the winter, flush the mixing drum with water after working, and discharge water in the water pump, water tank and water pipe to prevent them from being frozen.

Any question or support, please fill in the form below,we will get back to you as soon as possible!!

*
*

Related Articles:
Concrete Mixer Sold to Germany! Features Introduction of Twin Shaft Concrete Mixer Daswell Portable Concrete Mixer Can Meet Market Demands Innovative Concrete Mixer Technology to Meet Market Demand Sicoma Twin Shaft Concrete Mixer to Southeast Asia How to Replace the Mixing Blade for Concrete Mixer How to Reduce the Maintenance Cost of Concrete Mixing Machine Mixing Quality of Mini Concrete Mixer Equipment Details of Portable Concrete Mixer Product Knowledge of Reversing Drum Concrete Mixer

Copy Right:Henan Daswell Machinery Co., Ltd. All rights reserved.